In stock
Rda 01 Monitoring Electronics Without Locating
Monitoring, Water DetectionMonitoring Electronics without locating
Benefits
- Rapid detection of leakages
- Monitoring lengths up to 1000 m
- Up to 50 point sensors
- No system calibration required
- Simple integration into the building surveillance
- Can be combined with sensor cable and point sensor
-
Description
Marking
N/A
Ambient Temperature
Ambient temperature
-25 °C to +60 °C
Certification
EU Declaration of conformity
The RDA monitoring electronics can be easily integrated into the building surveillance.
The system detects quickly and reliably even small quantities of liquid leaks. An optical and acoustic alarm signal is given. At the same time floating contacts are set for signals to the building services management and control tasks.
The messages are saved until the reset via a push button or voltage disconnection. If the leak continues, the messages are lighting up again. The max. monitoring length is 1000 m. Up to 50 point sensors can be installed.
Technical Data
| Protection class | IP 20 |
| Structure | latch-on enclosure for mounting rail TS 35 |
| Dimensions | 22.5 x 82 x 101 mm (W x H x D) |
| Sensitivity | Self-monitoring sensor rupture and power failure |
| Display | optical: LED displays; operation/alarm/rupture acoustic: piezoelectric buzzer |
| Keyboard | reset button |
| Memory | Alarm/rupture relay memory |
| Connection | Inputs: – Voltage supply Type 2322: AC 230 V/50 to 60 Hz/2.4 VA Type 2422: DC 24 V/0.6 W – Sensor via two-wire lead (Sensor cable length: max. 1000 m) – Point sensors: max. 50 pcsOutputs: – Group alarm relay, two change-over contacts 0.25 A at AC 230 V/1 A at DC 24 V |
Manuals/Operating Instructions/Guides
User manual RDA01
- DE
- EN
Data Sheets
Datasheet RDA01
