Get In Touch
541 Melville Ave, Palo Alto, CA 94301,
ask@ohio.clbthemes.com
Ph: +1.831.705.5448
Work Inquiries
work@ohio.clbthemes.com
Ph: +1.831.306.6725

Marking

ATEX:
Ex II 2G Ex db eb IIC T6 Gb
Ex II 2G Ex db op is IIC T6 Gb (for PCB LED type only)
Ex II 2G Ex db eb op is IIC T6 Gb (for PCB LED type only)
Ex II 2D Ex tb IIIC T85°C Db
Ex II 2D Ex op is tb IIIC T85°C Db (for PCB LED type only)
IECEx:
Ex db eb IIC T6 Gb
Ex db op is IIC T6 Gb (for PCB LED type only)
Ex db eb op is IIC T6 Gb (for PCB LED type only)
Ex tb IIIC T85°C Db
Ex op is tb IIIC T85°C Db (for PCB LED type only)

Ambient Temperature

-20 °C ≤ Ta ≤ +60 °C

Certification

  • IECEx
    • EN
  • ATEX
    • EN
  • EAC
    • RU
  • INMETRO
    • PT

The Type EVFG linear luminaire with a fluorescent lamp or LED tube is an explosion-protected item of operating equipment with lamp sockets for fluorescent lamps Type T8 or LED tubes Ø26 with G13 base. It is used to illuminate operating and storage facilities in potentially explosive areas and may be deployed in Zones 1, 2 as well as 21 and 22.

The luminaire may be designed with the type of protection “Ex d” or “Ex de” (increased safety with separate connection space) in a 1-lamp or 2-lamp version. For the electrical connection, two threaded holes are provided to house the cable glands or blanking plugs, approved for the explosion-protected area (“Ex d” – ¾” NPT / “Ex de” – M25x1.5), whereby the second hole for possible through-wiring is sealed with a blanking plug in the factory. Various mounting accessories make it possible to install the luminaire with wall or ceiling mounting, pole mounting, or pendant mounting. In addition to the lighting feature, there is an option of using EVFG as an emergency light fitting, providing emergency lighting for up to 2 or 3 hours.

Technical Data

Protection class IP66 (IEC/ EN 60529)
Dimensions see data sheet
Material marine grade copper free aluminium (control gear & lamp body) high-temperature resistant borosylicate glass tube
Weight see datasheet
Voltage 100 – 240 V 50/60 Hz (cos ρ ≥ 0,98) – AT version (LED) 220 – 240 V 50/60Hz (cos ρ ≥ 0,98) – TR version (LED) 110 – 240 Vac – 50/60 Hz (cos ρ ≥ 0,98) – (fluorescent) 110 – 240 Vdc (fluorescent)

Questionnaires/Requirement Sheets

Customer requirements – Lighting
  • DE
  • EN

Manuals/Operating Instructions/Guides

Instruction for use
  • EN-IT
  • EN-RU

Declarations

EU Declaration of conformity
  • EN-IT

Data Sheets

Data Sheet

This website stores cookies on your computer. Cookie Policy