ESACS – ESXCS control station
Command and Signalling Devices, Electrical SystemsBenefits
- Different configurations available
- IP 66
- for the control and start-stop of equipment
-
Description
Marking
ATEX:
(Ex II 2 G) Ex d e ia/ib mb IIC T6 or
T5 or T4 Gb
(Ex II 2 D) Ex tb IIIC T85°C or T100°C or T135°C Db IP65/IP66
(Ex II 3 GD) Ex ec ia/ib IIB or IIC T6 or
T5 or T4 Gc
(Ex II 3 GD) Ex tc IIIC T85°C or T100°C or T135°C Dc IP65/IP66
IECEx:
Ex d e ia/ib ia ib mb IIC T6 / T5 / T4 / T3 Gb
Ex tb IIIC T85°C / T100°C / T135°C / T200°C Db IP65/IP66
Ex ec ia/ib/ic IIB or IIC T6 / T5 / T4 /T3 Gb
Ex tc IIIC T85°C / T100°C / T135°C / T200°C Db IP65/IP66
Ambient Temperature
-60 °C to +60 °C (standard)
Certification
-
ATEX
- EN
-
ATEX (Ex ec)
- EN
-
IECEx
- EN
-
IECEx (Ex ec)
- EN
-
CCC
- CN
-
ECASEx
- EN
-
INMETRO
- PT
-
INMETRO (Ex ec)
- PT
-
KC
- KO
-
NEC505
- EN
Increased safety Ex ed Control stations BARTEC ESACS.. and ESXCS.. series are designed to be installed in industrial plants, where potential hazardous atmos-pheres occur.
These areas are either classified as zone 1 and 2 or as zone 21 and 22.
The protection mode are:
- Increased safety “e” in combination with other modes of protection of the installed electrical components.
- By enclosure “t”.
Our control stations are mainly used for the control of the equipment such as motors, fans, pumps…Reading of physical quantities such as flow, level, pressure, temperature, current, voltage, frequency, speed control. The arrangement of the components inside the enclosure can be done following different configurations based on particular client’s requirements and always according to the certification limits.
Technical Data
| Protection class | IP 66 (IEC/EN 60529) |
|---|---|
| Material | Copper free aluminium light alloy Stainless steel AISI 316L |
| Weight | see data sheet |
| Dimensions | see data sheet |
Manuals/Operating Instructions/Guides
-
ATEX – Instruction for use
- IT-EN
-
ATEX – Instruction for use – Component
- EN
-
ATEX – Instruction for use – ESAnA
- EN
-
IECEx – Instruction for use
- IT-EN
-
IECEx – Instruction for use – Component
- EN
-
IECEx – Instruction for use – ESAnA
- EN
-
INMETRO – Instruction for use
- PT-EN
-
INMETRO – Instruction for use – ESAnA
- PT
-
KOC – Instruction for use
Nuova ASP – progetto 262
- KO
-
NEC505 – Instruction for use – ESA
- EN
-
NEC505 – Instruction for use – ESX
- FR
Declarations
-
ATEX – Declaration of conformity
- EN
-
ATEX – Declaration of conformity – Component
- EN
-
ATEX – Declaration of conformity – ESAnA
- EN
-
IECEx – Declaration of conformity – Component
- EN
- EN
-
IECEx – Declaration of conformity – ESAnA
- EN
Data Sheets
